Compare Products

2020 Massey Ferguson 1840
2020 Massey Ferguson 1840

Specs

General Information

Manufacturer
Massey Ferguson
Massey Ferguson
Model Year
2020
2020
Model
1840
1840
Model Code
1840
1840
Color
Red
Red

Dimensions

Weight
3,500 lb. (1,587 kg)
3,500 lb. (1,587 kg)
Width
Overall - 101 in. (2,565 mm)
Overall - 101 in. (2,565 mm)
Height
With shielding - 65 in. (1,651 mm)
With shielding - 65 in. (1,651 mm)
Length

Without bale chute - 182 in. (4,623 mm)

With bale chute - 218 in. (5,537 mm)

With bale thrower - 254 in. (6,452 mm)

Without bale chute - 182 in. (4,623 mm)

With bale chute - 218 in. (5,537 mm)

With bale thrower - 254 in. (6,452 mm)

Operational

Bale Forming Chamber

Plunger - 100 strokes / min.

Length of stroke - 22 in. (559 mm)

Mounting - 8 sealed ball bearing rollers

Plunger - 100 strokes / min.

Length of stroke - 22 in. (559 mm)

Mounting - 8 sealed ball bearing rollers

Bale Width
18 in. (457 mm)
18 in. (457 mm)
Pickup Width

Tine to tine - 70.2 in. (1,782 mm)

Inside panel to panel - 75.9 in. (1,928 mm)

Outside panel to panel - 89.1 in. (2,264 mm)

Tine to tine - 70.2 in. (1,782 mm)

Inside panel to panel - 75.9 in. (1,928 mm)

Outside panel to panel - 89.1 in. (2,264 mm)

Twine System

Type - Knotters

Protection - Shearbolt

>p>Twine container capacity - 10 balls

Type - Knotters

Protection - Shearbolt

>p>Twine container capacity - 10 balls

Tires
Flotation - 31 x 13.5-15, 8 Ply
Flotation - 31 x 13.5-15, 8 Ply
Number of Tines
112
112
Bale Size
Height - 14 in. (356 mm)
Height - 14 in. (356 mm)
Tractor Size

Minimum PTO - 50 hp (37 kW)

PTO speed - 540 rpm

Minimum PTO - 50 hp (37 kW)

PTO speed - 540 rpm

Auger Diameter
11 O.D. in. (280 mm)
11 O.D. in. (280 mm)

Features

Capability

  • 1800 SERIES SMALL SQUARE BALERS: Maybe you need a strong, reliable baler for a limited number of acres. Or you're a high-volume producer and custom operator who mechanically loads and transports a lot of hay. The 1800 Series has models to fill both needs.
  • SET IT & FORGET IT: A gauge lets you preset bale density to keep bale density and weight constant even as hay moisture conditions change through the day
  • DELICIOUS, NUTRITIOUS: Since each bale flake is pre-formed before it goes into the bale chamber, the nutritious leaves are more evenly distributed throughout the bale
  • TAKE THE PLUNGE: Short plunger strokes in the 1800 Series reduces wear on the baler, prolonging component life and increasing reliability
  • IN-LINE EVERYWHERE: Because field and road positions are one and the same, you save time when you’re on the move

Innovation

  • 1800 SERIES SMALL SQUARE BALERS: Unlike competitors, our 1800 Series is designed to follow directly behind the tractor. The result is dense, high quality hay - with no flimsy banana-shaped bales that immediately fall apart when they're picked up.
  • BIGGER BALE CHAMBER: Our OptiForm™ bale chamber has been extended by 18 in. to ensure consistent bale shape and density in all conditions
  • PRE-COMPRESSION ROCKS! - Our pre-compression chamber starts building density before baling to reduce plunger load, lower HP requirements and increase baling capacity
  • FORK IT OVER: A new packer fork with revised spacing significantly increases feeder capacity in a wide range of crops and conditions
  • PICKED CLEAN: Enhanced pick-up cross augers provide additional pick-up capacity, particularly in large windrows and uneven crops

Capability

  • 1800 SERIES SMALL SQUARE BALERS: Maybe you need a strong, reliable baler for a limited number of acres. Or you're a high-volume producer and custom operator who mechanically loads and transports a lot of hay. The 1800 Series has models to fill both needs.
  • SET IT & FORGET IT: A gauge lets you preset bale density to keep bale density and weight constant even as hay moisture conditions change through the day
  • DELICIOUS, NUTRITIOUS: Since each bale flake is pre-formed before it goes into the bale chamber, the nutritious leaves are more evenly distributed throughout the bale
  • TAKE THE PLUNGE: Short plunger strokes in the 1800 Series reduces wear on the baler, prolonging component life and increasing reliability
  • IN-LINE EVERYWHERE: Because field and road positions are one and the same, you save time when you’re on the move

Innovation

  • 1800 SERIES SMALL SQUARE BALERS: Unlike competitors, our 1800 Series is designed to follow directly behind the tractor. The result is dense, high quality hay - with no flimsy banana-shaped bales that immediately fall apart when they're picked up.
  • BIGGER BALE CHAMBER: Our OptiForm™ bale chamber has been extended by 18 in. to ensure consistent bale shape and density in all conditions
  • PRE-COMPRESSION ROCKS! - Our pre-compression chamber starts building density before baling to reduce plunger load, lower HP requirements and increase baling capacity
  • FORK IT OVER: A new packer fork with revised spacing significantly increases feeder capacity in a wide range of crops and conditions
  • PICKED CLEAN: Enhanced pick-up cross augers provide additional pick-up capacity, particularly in large windrows and uneven crops