Compare Products

2021 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp
2021 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2021
2021
Model
Z Master 3000 60 in. Kawasaki FX 25.5 hp
Z Master 3000 60 in. Kawasaki FX 25.5 hp
Model Code
72950
72950
Color
Red
Red

Body

Frame
Carrier - 3 x 1.5 in. x 10 ga.
Carrier - 3 x 1.5 in. x 10 ga.
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Rollover Protection (ROPS)
Folding; standard
Folding; standard

Drivetrain

Travel Speed Forward
10 mph
10 mph
Wheels/Tires
Anti-Scalp Wheels - 4 standard
Anti-Scalp Wheels - 4 standard
Drive Tires
24 x 12 - 12 in.
24 x 12 - 12 in.
Tire Size
Caster - 13 x 6.5 - 6 in. pneumatic
Caster - 13 x 6.5 - 6 in. pneumatic

Electrical

Hour Meter
Standard
Standard

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FX
FX
Horsepower

25.5 hp

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

25.5 hp

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Displacement
852 cc
852 cc
Ignition
Electric start, standard
Electric start, standard
Air Cleaner
Heavy-duty canister
Heavy-duty canister
Fuel Type
Gasoline
Gasoline
Fuel Capacity
8 gal.
8 gal.

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Cutting Width
60 in. (152 cm)
60 in. (152 cm)
Turning Radius
Zero
Zero
Mowing Height Range
1.0 - 5.5 in. in 0.25 in. increments
1.0 - 5.5 in. in 0.25 in. increments

Operational

Steering
Controls - 1-5/8 in. diameter grips; adjustable, dampened
Controls - 1-5/8 in. diameter grips; adjustable, dampened
Deck Construction
Design - 80-Grade 7 ga. 60 in. (152 cm) TURBO FORCE® with bull-nose bumper
Design - 80-Grade 7 ga. 60 in. (152 cm) TURBO FORCE® with bull-nose bumper
Discharge

Chute - Rubber

Adjustable Baffle - Standard

Chute - Rubber

Adjustable Baffle - Standard

Spindles

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Blades
0.25 in. (0.6 cm) thick heat-treated steel
0.25 in. (0.6 cm) thick heat-treated steel
Blade Tip Speed
18,300+ ft. / min. (5,577.8 m. / mim.)
18,300+ ft. / min. (5,577.8 m. / mim.)

Features

Features

  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.

Features

  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.