Compare Products

2022 Toro Z Master 6000 72 in. Kohler EFI 38 hp
2022 Toro Z Master 6000 72 in. Kohler EFI 38 hp

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2022
2022
Model
Z Master 6000 72 in. Kohler EFI 38 hp
Z Master 6000 72 in. Kohler EFI 38 hp
Model Code
72947
72947
Color
Red
Red

Body

Frame
Carrier - 3 x 1-1/2 in. x 10 ga. (7.6 x 3.8 cm)
Carrier - 3 x 1-1/2 in. x 10 ga. (7.6 x 3.8 cm)
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Rollover Protection (ROPS)
Folding; standard
Folding; standard

Drivetrain

Transmission/Drive
Unitized pumps (16 cc / rev) & wheel motors (17.1 cir)
Unitized pumps (16 cc / rev) & wheel motors (17.1 cir)
Travel Speed Forward
11.5 mph (18.5 km / h)
11.5 mph (18.5 km / h)
Drive Tires
24 x 12 - 12 in. (61 x 30.5 - 30.5 cm)
24 x 12 - 12 in. (61 x 30.5 - 30.5 cm)
Steering Tires
Caster - 3 x 1.5 in. x 10 ga. (7.6 x 3.8 cm x 10 ga.)
Caster - 3 x 1.5 in. x 10 ga. (7.6 x 3.8 cm x 10 ga.)

Electrical

Hour Meter
Standard
Standard

Engine

Engine Make
Kohler®
Kohler®
Engine Model
Command Pro EFI with Horizon™ technology
Command Pro EFI with Horizon™ technology
Gross Horsepower

38 hp

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 and SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

38 hp

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 and SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
999 cc
999 cc
Fuel System
EFI
EFI
Air Cleaner
Heavy-duty canister
Heavy-duty canister
Fuel Type
Gas
Gas
Fuel Capacity
12 gal. (45.4 l)
12 gal. (45.4 l)

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Length
86.1 in. (218.7 cm)
86.1 in. (218.7 cm)
Width

With Deflector Up - 73.6 in. (186.9 cm)

With Deflector Down - 87.6 in. (222.5 cm)

With Deflector Up - 73.6 in. (186.9 cm)

With Deflector Down - 87.6 in. (222.5 cm)

Height

ROPS (Folded) - 46.8 in. (118.9 cm)

ROPS (Upright) - 70.5 in. (179.1 cm)

ROPS (Folded) - 46.8 in. (118.9 cm)

ROPS (Upright) - 70.5 in. (179.1 cm)

Weight
1,369 lb. (621 kg)
1,369 lb. (621 kg)
Cutting Width
72 in. (183 cm)
72 in. (183 cm)
Mowing Height Range
1.0 - 5.5 in. (2.5 - 14 cm)
1.0 - 5.5 in. (2.5 - 14 cm)

Operational

Steering
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Deck Construction
80-Grade 7 ga. 72 in. (183 cm) TURBO FORCE® with bull-nose bumper
80-Grade 7 ga. 72 in. (183 cm) TURBO FORCE® with bull-nose bumper
Discharge

Chute - Rubber

Adjustable Baffle - Standard, tools-free

Chute - Rubber

Adjustable Baffle - Standard, tools-free

Spindles

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Blades
0.25 in. (0.6 cm) heat-treated steel
0.25 in. (0.6 cm) heat-treated steel
Blade Tip Speed
18,500+ ft. / min. (5,640 m. / min.)
18,500+ ft. / min. (5,640 m. / min.)
PTO Clutch
Electromagnetic
Electromagnetic

Features

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (0.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.
  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.
  • HORIZON® TECHNOLOGY: Choose the performance mode to increase productivity and reduce fuel consumption.
  • 72" TURBO FORCE® CUTTING DECK: Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (0.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions.
  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.
  • HORIZON® TECHNOLOGY: Choose the performance mode to increase productivity and reduce fuel consumption.
  • 72" TURBO FORCE® CUTTING DECK: Enjoy years of reliable performance with a fully tubular frame and 7-gauge steel deck.