Compare Products

2020 Exmark Radius S-Series 60 in. Exmark RD 708 cc
2020 Exmark Radius S-Series 60 in. Exmark RD 708 cc

Specs

General Information

Manufacturer
Exmark
Exmark
Model Year
2020
2020
Model
Radius S-Series 60 in. Exmark RD 708 cc
Radius S-Series 60 in. Exmark RD 708 cc
Model Code
RAS708GEM60RC3
RAS708GEM60RC3
Color
Red
Red

Body

Frame
Tractor - Unibody, welded, heavy-duty 2 X 3 in. rectangular tubular steel
Tractor - Unibody, welded, heavy-duty 2 X 3 in. rectangular tubular steel
Seat
High back seat with foam padded seat cushion, armrests, integral safety switch
High back seat with foam padded seat cushion, armrests, integral safety switch
Rollover Protection (ROPS)
2-post foldable ROPS standard with seat belt and latch
2-post foldable ROPS standard with seat belt and latch
Safety Features
Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators
Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Transmission/Drive

Drive - Hydro

Drive description - Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters

Drive - Hydro

Drive description - Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters

Number of Speeds
Infinitely variable speed selection
Infinitely variable speed selection
Travel Speed

Forward - 0-9 mph (14.5 km/h)

Reverse - 0-5 mph (8 km/h)

Forward - 0-9 mph (14.5 km/h)

Reverse - 0-5 mph (8 km/h)

Wheels/Tires

Casters - 0.375 in. thick caster yoke arms

Front caster tires - 13 x 6.5-6, smooth tread, pneumatic, caged roller bearings

Drive tires - 23 x 10.5-12 K500

Drive wheel release - Allows unit movement without engine running

Casters - 0.375 in. thick caster yoke arms

Front caster tires - 13 x 6.5-6, smooth tread, pneumatic, caged roller bearings

Drive tires - 23 x 10.5-12 K500

Drive wheel release - Allows unit movement without engine running

Brakes
Parking - Lever-actuated pawl
Parking - Lever-actuated pawl

Electrical

Battery
12V with 15A alternator
12V with 15A alternator
Instrumentation
Fuel indicator - Translucent visual
Fuel indicator - Translucent visual

Engine

Engine Make
Exmark
Exmark
Engine Model
LC2P77F-HD
LC2P77F-HD
Engine Type
V-Twin
V-Twin
Displacement
708 cc
708 cc
Fuel System
Carbureted
Carbureted
Carburetion
Yes
Yes
Air Cleaner
Donaldson heavy duty
Donaldson heavy duty
Fuel Type
Gas
Gas
Fuel Capacity
7 gal. (26.5 l) single fuel tank with single fill location
7 gal. (26.5 l) single fuel tank with single fill location

Measurements

Length
84.3 in. (214.1 cm)
84.3 in. (214.1 cm)
Width
66 in. (167.6 cm)
66 in. (167.6 cm)
Height
70.2 in. (178.3 cm)
70.2 in. (178.3 cm)
Mowing Width
60 in.
60 in.
Mowing Height Range
1.5-5 in. (3.8-12.7 cm)
1.5-5 in. (3.8-12.7 cm)
Mowing Height Adjustments
0.25 in. (0.6 cm) increments, adjustable from operator's
0.25 in. (0.6 cm) increments, adjustable from operator's

Operational

Steering
Control - Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment
Control - Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment
Deck Construction

10-gauge high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 3

10-gauge high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 3

Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position
Discharge
Rear-discharge standard with option to mulch
Rear-discharge standard with option to mulch
Spindles
Blade - No maintenance, sealed and non-greasable spindles; 7.75 in. diameter cutter housing contains 25 mm (0.98 in.) diameter spindle shaft and hex blade drive
Blade - No maintenance, sealed and non-greasable spindles; 7.75 in. diameter cutter housing contains 25 mm (0.98 in.) diameter spindle shaft and hex blade drive
Blades
3 at 20.5 in. length
3 at 20.5 in. length
Blade Tip Speed
Approximately 18,500 fpm
Approximately 18,500 fpm
Power Take-Off (PTO)
Engagement - MagStop electromagnetic 125 ft. lb. clutch
Engagement - MagStop electromagnetic 125 ft. lb. clutch

Features

Features

  • ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
  • HEAVY DUTY UNIBODY FRAME: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
  • QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
  • HEIGHT OF CUT MADE EASY: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

Features

  • ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
  • HEAVY DUTY UNIBODY FRAME: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
  • QUICK ADJUSTABLE ROLLOVER PROTECTION SYSTEM (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
  • HEIGHT OF CUT MADE EASY: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.