Compare Products

Toro Fixed Deck Gear Drive 32 in. Kawasaki FS481V 14.5 hp T-Bar
Toro Fixed Deck Gear Drive 32 in. Kawasaki FS481V 14.5 hp T-Bar

Specs

General Information

Manufacturer
Toro
Toro
Model
Fixed Deck Gear Drive 32 in. Kawasaki FS481V 14.5 hp T-Bar
Fixed Deck Gear Drive 32 in. Kawasaki FS481V 14.5 hp T-Bar
Model Code
30672
30672
Color
Red
Red

Drivetrain

Transmission/Drive
Drive System - 5-speed
Drive System - 5-speed
Travel Speed
Forward Ground / Transport - Up to 6.2 mph (9.9 kph)
Forward Ground / Transport - Up to 6.2 mph (9.9 kph)
Wheels/Tires

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) flat-free

Drive Tires - 13 x 5 - 6 in. (33 x 13 - 15 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) flat-free

Drive Tires - 13 x 5 - 6 in. (33 x 13 - 15 cm)

Brakes
6 in. (15 cm) band
6 in. (15 cm) band

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

Displacement
603 cc
603 cc
Air Cleaner
Air Filter - 2-stage
Air Filter - 2-stage
Starter
Pull cord, recoil
Pull cord, recoil
Fuel Type
Gasoline
Gasoline
Fuel Capacity
5 gal. (18.9 l / 20 qt.)
5 gal. (18.9 l / 20 qt.)

Measurements

Length
Box Dimensions - 78 in. (198.1 cm)
Box Dimensions - 78 in. (198.1 cm)
Width
Box Dimensions - 49.5 in. (125.7 cm)
Box Dimensions - 49.5 in. (125.7 cm)
Height
Box Dimensions - 52.25 in. (132.7 cm)
Box Dimensions - 52.25 in. (132.7 cm)
Mowing Height Range
1.0 - 4.25 in. (2.5 - 10.8 cm)
1.0 - 4.25 in. (2.5 - 10.8 cm)
Mowing Width
32 in. (81 cm)
32 in. (81 cm)

Operational

Steering
Controls - T-Bar
Controls - T-Bar
Deck Construction
Design - 32 in. (81 cm) side discharge
Design - 32 in. (81 cm) side discharge
Blades
2
2
Blade Tip Speed
18,500 ft. / min. (5,638 m. / min.)
18,500 ft. / min. (5,638 m. / min.)
Discharge

Side

Chute - Rubber

Side

Chute - Rubber

Features

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • RUGGED DECK DESIGN: High-capacity 7/10 guage deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5" deep deck features 8" aluminum spindles and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • RUGGED DECK DESIGN: High-capacity 7/10 guage deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5" deep deck features 8" aluminum spindles and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.
Newsletter Sign-Up
Captcha is required.
By pressing SUBMIT, you agree that DX1, LLC and Wellsboro Equipment may call/text you at the number provided, for either informational or marketing purposes, using an automatic telephone dialing system or pre-recorded/artificial voices. Msg/data rates may apply. You don’t need to consent as a condition of any purchase & you may revoke your consent at any time. You also agree to our Privacy Statement & Terms of Use.